Precision Road Marking Thickness Gauge Measurement Direct From The Factory

Road marking thickness measuring instrument

Products Description

Introduction:

GT-CT-001Pavement marking thickness measuring instrument is specially designed and produced for production, quality supervision,engineering construction and supervision units to measure the marking thickness. It has the characteristics of reasonable structure, simple operation, wide applicability, high measurement accuracy, digital retention function, good measurement and reliability, etc.

Main Functional Characteristics: 一、 Meet the standard GB/T 16311-2005 二、 Technical parameters 1. Measuring range: 0 ~ 12mm 2. Measurement accuracy: 0.01mm 三、 Structural composition The marking thickness measuring instrument is mainly composed of digital high-precision dial gauge, thickness measuring mechanism and locking screw of dial gauge. 四、 Operation steps 1, preparation: the base note and the moving flat block (thickness measuring mechanism) are at the same level, then the digital high precision dial gauge head is placed in the mounting seat of the thickness measuring mechanism, and then the screw is adjusted. 2. Reset the reading of display screen: reset the display screen of digital high-precision percentile meter. 3. Measurement: place the measuring base on the line to be measured, so that the edge of its joint with the moving block is parallel to the edge of the line. The thickness of the line can be measured when the moving block can fall or move down freely. In order to facilitate reading, press the hold button of the digital high-precision percentile meter, lift the marking thickness tester to read and record the value

Road Marking Thickness Gauge Thickness Measurement

Products Details

Introduction:

Featured Products

Contact us