| Raw Material | C5 Petroleum Resin, CaCO3, Glass Beads, DOP, PE, etc. |
| Gravity, g/m3 | 2.1 g/ml |
| Color | white, yellow, etc. |
| Heating Temperature | 180℃-220℃ |
| Softening Point, ℃ | 110℃ |
| Coating Appearance | No wrinkles, dots, blisters, cracks, fall-out & stick tyres |
| Drying Time, min | Within 3 minutes |
| Compressive Strength, MPa | 26 |
| Abrasive Resistance, mg | 42 |
| Water Resistance | Great(in water for 24 hours) |
| Alkali Resistance | Great(in saturated solution of calcium hydroxide for 24 hours) |
| Glass Beads, % | 30~40% |
| Fluidity, s | 40s |
| Coating Resisitance | Resist -10℃ for 4 hours |
| Heat Resistance | Under 0℃-2℃ for 4 hours |
| Package | 25kg/bag, by plastic woven bag. One ' container can load Max. 25 tons. |
| Storage | dry, cool, avoid direct sunlight |
| Expiration date | 365 days |
| Theoretical spray rate | 4-5kg/㎡ |
1. Cohesiveness Specific formula, of good cohesiveness with road, pre-mark with our company’s dedicated primer (especially for concrete base) will strengthen the cohesiveness. 2. Anti-slipperiness Our paint has anti-slipping material. On condition of good flowability, the anti-slipping material can ensure good anti-slipperiness and maximize the traffic safety. 3. Reflective effect According to the settling rate of the glass beads, properly choose stable refractive and high quality coating type glass beads with different particle ratio. Mix them evenly inside the paint and dispense mixed type glass beads when executing will ensure new and old marking always to be in high reflection. 4. Dry fast Use different formula to produce the paint according to temperature, humidity and roadbed condition when executing, ensure fast drying speed and antifouling property of the marking. 5. Stability Choose excellent light and heat stability raw material ratio, add ultraviolet-proof additives at the same time, to make sure the long-acting color and luster even under strong sunshine. 6. Anti hair-cracking Hair-cracking of the marking is a technical problem in road marking material industry home and abroad. After long-term research and by way of adding high temperature resistance lipid material and functional filler, our company completely solved the hair-cracking problem during executing.
Our main markets now include the Philippines, Vietnam, Malaysia, Japan, South Korea, the United Kingdom, the United States, Turkey, Laos, Cambodia, Thailand, Myanmar, Singapore, Indonesia, Brunei, Ethiopia and Venezuela. We are also actively developing the markets of other countries. Welcome to negotiate. Thermoplastic road marking paint consists of resin,EVA,PE wax ,fillers materials,glass bead,which is solid powder condition at normal temperature,If is is heated to 180-200 degrees by heat fusing pot under construction,it will appears flowage, coating pot under construction, it will appears flowage, coating the paint to the road surface will form hard film,It has full line type,strong wearing resistance and other flowage, Sprinkling reflecting glass micro beads on the surface under consturction, it has good reflecting effect at night , it is widedy applied in highway and road,Accordning to the enviroment used and the different construction requirements,we can supply different types of paint for our customer option. With the increasing social demand of glass micro-beads ,the increasing of manufacture .and the relatively low price and not standardized quality ,we choose the manufacturer with economic strength according to the our big usage and customize the bloomed glass micro-beads used for road line-marking according to the standardized quality requirement .Three specifications :the surface sprinkling beads for thermoplastic line-marking ,the surface sprinkling beads for normal temperature line-marking ,the surface sprinkling beads for water-base line-marking.We can supply enough stock in hand ever day.